jupiter 2 push rod kit 1.5m long - trailer arm for motor with wheels for additional lights
can be used with crossbars to achieve 4 or 6 light setup
or 4 payments of $17.00 with Info3 in stock
Jupiter 2 Push-rod kit - extend your motor by adding the adjustable beam. Does not include a second rail, so if you are pushing past the limits of the rail you have, you will need another rail.
Planning - 600w lights should be spaced at 1.0m to 1.2m apart and 1000W lights at between 1.2 to 1.5m - the 1.5m rod can be adjusted to any length from 1.5m or less - excess can be left or cut off.
Is made up of a rod and a jockey wheel which connects to your jupiter motor- like a trailer on a car - and is used for adding extra lights. We only stock the 1.5m as this covers nearly every possibility and the longer it gets, the more freight we will end up charging you. Other Pushrod lengths are available - 1, 1.2, 1.5 or 2 metre, please contact us if you need a length other than 1.5m. 1.5m is usually the best and the point to hang the light is adjustable along the 1.5m length.
Extend your existing system with a pushrod kit to an extra light in line with the rail. You will most likely need to order an extra rail and maybe crossbars which will allow your Jupiter 2 to carry up to 6 lights.
Comes complete with all mounting hardware
1.5 metre aluminium rail suitable for adding length to your existing set up or use in small tents or cupboards. NOT suitable for the old painted motor units.
Comes complete with mounting hardware.
Not suitable for the old type motor units that are painted.
Be The First To Review This Product!
Help other Hydrocentre Hydroponics users shop smarter by writing reviews for products you have purchased.