flood fitting 13mm tub outlet - 13mm tail 30-32mm hole

$5.00

More info.

Make 4 interest-free payments of $1.25 fortnightly and receive your order now.

32 in stock
Backorders are sent in 2-4 days


Calculate Shipping

flood fitting 13mm tub outlet - 13mm tail 32mm hole

Available in 13mm, 19mm and 25mm barbed tails as well as extensions and screens to keep media out of the drainage.
These fittings are designed for a flood and drain system. The hole would be ideal at 30-31mm. 32mm is about the maximum.
These fittings are ideal for flood and drain and should always be located above the tank in case of the odd drip while the growing area is full of water. Their low design will allow almost all the water to be removed from the tray. They do not leak in the situation they are designed for which is directly above a reservoir.
A large weight of the water can produce a drip if left for a period of time so flood times of more than 15 minutes should be avoided.
If only used as a drain, e.g. drip fed system drainage, then the chance of a drip is very very small.
 
These fittings are not pressure rated, and should not be used below the level of water - e.g. connecting two tanks of water together. The types of fittings that are used in this kind of situation have a rubber seal on both sides and can be tightened much tighter than this type of design.
They are very good for trays and containers that will need drainage or flooding over a short term.
 
Q: why is the Australian symbol no longer on the fitting
A: We have not changed suppliers. They are still quality Australian made fittings. They will not suit submerged applications as that is not what they have been designed to do. They are designed to fit Hydroponic drains and flood and drain trays.

 

(13tuboutlet)

SKU 13tuboutlet
Barcode # 1639
Shipping Weight 0.0500kg
Type irrigation general

Be The First To Review This Product!

Help other Hydrocentre Hydroponics users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


13mm Rachet Clip

13mm Rachet Clip

 

19mm joiner barbed

19mm joiner barbed

 

19mm reducing tee with 13mm branch

19mm reducing tee with 13mm branch

 

600w Cultiv8 ballast lamp and Silver Cool Tube Kit - get closer and brighter by taking the heat out of the light.

600w Cultiv8 ballast lamp and Silver Cool Tube Kit

 

15% OFF RRP $258.00
6 Pot Recirculating Satellite Hydroponic System kit - Clay pots pump irrigation tank timer - high performance

6 Pot Recirculating Satellite Hydroponic System ki

 


More From This Category


13mm nut and tail to 1 inch

13mm nut and tail to 1 inch

 

Uniseal 2.54inch x 3 inch 102mm holesaw 101113

Uniseal 2.54inch x 3 inch 102mm holesaw 101113

 

13mm supersoft hose x 10m roll

13mm supersoft hose x 10m roll

 

13mm to 3/4 Director

13mm to 3/4 Director

Usually sent in a 1+ days   Details

Backorders are sent in 2-4 days
13mm to 1/2 Director

13mm to 1/2 Director

 

13mm cross 4 way irrigation fitting

13mm cross 4 way irrigation fitting

 

Small 13mm Poly Feed Ring with 6mm Feeders flow ring

Small 13mm Poly Feed Ring with 6mm Feeders flow ri

 

13mm barbed to 1/2 inch female threaded elbow

13mm barbed to 1/2 inch female threaded elbow

Usually sent in a 1+ days   Details

Backorders are sent in 3-5 days