Gavita Controller EL1F - replaces EL1 - Timer/controller for 1 to 40 Gavitas with adjustable dimming of lights if too hot and EC fan control
Controls fans and Gavita lighting (EL2F shown)
Make 4 interest-free payments of $174.75 fortnightly and receive your order now.Sold Out - Backorder Available
The EL F controllers are Gavitas latest controllers. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control.
The EL1F has one channel (40 lights) - the EL2F has 2 channels (2 x 40Lights)
- 0-10V EC fan control (Electronic Fans only - AC fans will require another controller)
- Intelligent PID fan control
- Non-volatile memory
- Event logging
- Independent sunrise and sunset settings
- Independent light cycles on the EL2
|Lighting control channels||1||2|
|Max Repeater Bus fixtures||500||1000|
|Max Single Bus fixtures||40*||80*|
|Inverse channels (flip/flop)||•|
|Alarm contacts||2, nc/no|
|EC Fan control outputs||1||2|
|Fan control range||10-100%||10-100%|
|Maximum number of fans||2||4|
|External Fan control Module (EFM1)||•||•|
|Fan Balancer (FB1)||1||2|
|External Contactor Module (ECM1)||•|
|B200 booster (max. 3 per port)||3||6|
|*without booster modules||*without booster modules|
Features & Benefits
0-10V EC fan control
Modern EC fans contain a brushless DC motor, which is powered by a controllable electronic driver. They offer a great control range while maintaining power, torque, and static pressure, at much lower energy use. Though they are more expensive than the traditional AC fans, their precise speed control and torque maintenance result in a much better, and quieter control of air flow.
No longer do you need separate high-power speeds controllers to regulate your extraction and intake fans: This little intelligent controller can control them all, more precise, quieter and with a much better performance. Whether you want to move 1 cf/s or 1,000 cf/s: this controller can handle any size EC fan.
Switch, dim and boost centrally
Now you have complete control over the light cycle and the output of your fixtures from one single point. Never reach to a ballast again!
Independent cycles on EL2 models
With our first generation, the EL2 models had a “follow” or “inverse” function, allowing you to use the two ports for a large room, or two flowering rooms “flip/flopping” in a 12/12 cycle. This is still possible, but now you can program the two channels of an EL2 completely separate. You can program two different, and overlapping cycles, for example a 12/12 on channel 1 and an 18/2 on channel 2. Basically, you have the functionality of 2 EL1 controllers in one, plus the extra functionality of the ECMs and the alarm contacts on the EL2 series
Setting up the controller is a breeze, with a 5 language text interface in plain language on a high quality OLED display.
Be The First To Review This Product!
Help other Hydrocentre Hydroponics users shop smarter by writing reviews for products you have purchased.